# APN configuration issue

**URL:** <https://forum.sierrawireless.com/t/apn-configuration-issue/11928>\
**Category:** Uncategorized\
**Created:** [May 20, 2014, 3:37pm UTC](https://forum.sierrawireless.com/t/apn-configuration-issue/11928 "2014-05-20T15:37:09Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![arnaudlanger](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@arnaudlanger](https://forum.sierrawireless.com/u/arnaudlanger)\
**Post date:** [May 20, 2014, 3:37pm UTC](https://forum.sierrawireless.com/t/apn-configuration-issue/11928/1 "2014-05-20T15:37:09Z")

</div>

Hiya,

I experience some issues with the APN configuration.

Thanks to release 14.04 of Legato, I can now set a userName and a password for the APN I set.  
This is extracted from the documentation:

`modemServices/
           modemDataConnection/
               <ProfileName_1>/
                   accessPointName<string> == <ADDR>
                   packetDataProtocol<string> == <PDP_TYPE>
                   authentication/
                       pap/
                           enable<bool> == <true/false>
                           userName<string> == <USERNAME>
                           password<string> == <PWD>
                       chap/
                           enable<bool> == <true/false>
                           userName<string> == <USERNAME>
                           password<string> == <PWD>`

So i modified (with vi) the configuration tree located in /opt/legato/configTree. (xxxxxxx represents a string)

```auto
{ "apps" { } "modemServices" { "modemDataConnection" { "internet" { "accessPointName" "xxxxxxx" "authentication" { "pap" { "enable" "false" "userName" "xxxxxxx" "password" "xxxxxxx" } "chap" { "enable" "true" "userName" "xxxxxxx" "password" "xxxxxxx" } } } } } } 
```

My issue is that when I install or uninstall an application, the only field kept (regarding the modemServices section) is `
"modemServices" { "modemDataConnection" { "internet" { "accessPointName" "xxxxxxx" } } }
`

Did i set correctly the configuration tree ?  
Do you know how I can solve this issue ?

Thanks by advance,

Regards

---

<div class="post-metadata">

**Author:** ![esun](https://avatars.discourse-cdn.com/v4/letter/e/8e7dd6/32.png) [@esun](https://forum.sierrawireless.com/u/esun)\
**Post date:** [May 20, 2014, 7:53pm UTC](https://forum.sierrawireless.com/t/apn-configuration-issue/11928/2 "2014-05-20T19:53:13Z")

</div>

Hi,

We would recommend users to use the ‘config’ tool whenever modifying the configDB. Modifying the configDB in /opt/legato/configTree/system.xxxx is more prone to errors if something is incorrect in the entry.

Since there is currently a configDB related bug in 14.04 (which is fixed for next update on github), please try the following to create the configDB with the same specs mentioned above.

1. Delete /modemServices (clean slate)
2. legato restart
3. Now we can create the entries identical to the one above (system.xxxx file)`
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/accessPointName xxxxxxx
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/pap/enable false bool
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/pap/userName xxxxxxx
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/pap/password xxxxxxx
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/chap/enable true bool
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/chap/userName xxxxxxx
root@swi-mdm9x15:/# config set /modemServices/modemDataConnection/internet/authentication/chap/password xxxxxxx`

This should show up like:

`root@swi-mdm9x15:/# config get /
/
  apps<empty>
  modemServices/
    modemDataConnection/
      internet/
        accessPointName<string> == xxxxxxx
        authentication/
          pap/
            enable<bool> == f
            userName<string> == xxxxxxx
            password<string> == xxxxxxx
          chap/
            enable<bool> == t
            userName<string> == xxxxxxx
            password<string> == xxxxxxx
`

From looking at my system.xxxx file, it looks like your boolean entries were set incorrectly.

`
{ "apps" ~ "modemServices" { "modemDataConnection" { "internet" { "accessPointName" "xxxxxxx" "authentication" { "pap" { "enable" !f "userName" "xxxxxxx" "password" "xxxxxxx" } "chap" { "enable" !t "userName" "xxxxxxx" "password" "xxxxxxx" } } } } } }`

Hope this helps,  
Enoch 😃

---

<div class="post-metadata">

**Author:** ![arnaudlanger](https://avatars.discourse-cdn.com/v4/letter/a/8491ac/32.png) [@arnaudlanger](https://forum.sierrawireless.com/u/arnaudlanger)\
**Post date:** [May 22, 2014, 3:44pm UTC](https://forum.sierrawireless.com/t/apn-configuration-issue/11928/3 "2014-05-22T15:44:56Z")

</div>

Hi,

Indeed, the solution was to use the config tool. I set the fields in the configuration database as you advised me to do, and now I can install/uninstall application without having the modemServices branch in the configTree file removed.

There is some typo in the documentation though. The help is displayed correctly in the console

[code]root@swi-mdm9x15:~# config help  
Usage:

To read a value:  
config get

To write a value:  
config set []

To delete a node:  
config delete

To import config data:  
config import

To export config data:  
config export

Where:  
: Is a path to the tree and node to operate on.  
: Path to the file to import from or export to.  
: Is a string value to write to the config tree.  
: Is optional and mmust be one of bool, int, or string.  
If type is bool, then value must be either true or false.  
If unspecified, the default type will be string.

```
A tree path is specified similarly to a *nix path.

For example:
    /a/path/to/somewhere

The configTree supports multiple trees, a default tree is given per user.
If the config tool is run as root, then alternative trees can be specified
in the path by giving a tree name, then a colon and the value path as
normal.

As an example, here's of the previous paths, but selecting the tree named
'foo' instead of the default tree:

    foo:/a/path/to/somewhere

```

[/code]

But not in the online documentation : [legato.io/legato-af/14\_04/co … mands.html](http://www.legato.io/legato-af/14_04/config_d_b_commands.html)  
(the set and get commands are missing)

Thanks for your help !

Regards

---

<div class="post-metadata">

**Author:** ![esun](https://avatars.discourse-cdn.com/v4/letter/e/8e7dd6/32.png) [@esun](https://forum.sierrawireless.com/u/esun)\
**Post date:** [May 22, 2014, 6:42pm UTC](https://forum.sierrawireless.com/t/apn-configuration-issue/11928/4 "2014-05-22T18:42:19Z")

</div>

Oups, the documentation will be updated shortly to reflect the new changes for the config tool.

Thanks,  
Enoch
