# AirPrime BX310x - HTTP Web Server

**URL:** <https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767>\
**Category:** IoT Modules\
**Created:** [October 12, 2020, 6:03am UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767 "2020-10-12T06:03:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![derbenk](https://avatars.discourse-cdn.com/v4/letter/d/8797f3/32.png) [@derbenk](https://forum.sierrawireless.com/u/derbenk)\
**Post date:** [October 12, 2020, 6:03am UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767/1 "2020-10-12T06:03:39Z")

</div>

Hi everyone.  
I’m sorry for my bad english. I’m using google translate.  
I use BX310x modules.

I am trying to use the built-in HTTP Web Server. I have enabled forward HTTP requests to host mode. I see requests from the client but cannot send a response from the server. I could not find the required AT command. Tell me how to send responses to requests.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 12, 2020, 7:37am UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767/2 "2020-10-12T07:37:52Z")

</div>

if you enable the forward HTTP requests to host mode, it is no longer serving as http web server.  
You can use +KTCP,+KUDP or +KHTTP command to send response to the requests.

---

<div class="post-metadata">

**Author:** ![derbenk](https://avatars.discourse-cdn.com/v4/letter/d/8797f3/32.png) [@derbenk](https://forum.sierrawireless.com/u/derbenk)\
**Post date:** [October 12, 2020, 11:27am UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767/3 "2020-10-12T11:27:41Z")

</div>

I configure the access point and HTTP Server like this:  
AT&F  
AT+SRWCFG=2,3  
AT+SRWAPNETCFG=1,“192.168.4.1”,“192.168.4.2”,“192.168.4.101”, 120  
AT+SRWAPCFG=“ER\_003”,“A7pzrtfg”,3,0,0,100  
AT+SRWSSTATE=1

Now I want to receive data from the client and send data to the client via UART. Tell me what to do next?  
For example, you need to send data from Postman to the server in JSON format: {“cmd”: 1, “per”: 2, “inf”: 3} and send data in JSON format from the server to this request: {“cmd”: 4 , “per”: 5, “inf”: 6}.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 12, 2020, 1:04pm UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767/4 "2020-10-12T13:04:48Z")

</div>

you need to set up AT+SRWSFWDHTTP command.  
As said before, if you want to send data to the client, you need to use +KTCP,+KUDP or +KHTTP command.

---

<div class="post-metadata">

**Author:** ![dubalamar](https://avatars.discourse-cdn.com/v4/letter/d/958977/32.png) [@dubalamar](https://forum.sierrawireless.com/u/dubalamar)\
**Post date:** [December 21, 2021, 6:39am UTC](https://forum.sierrawireless.com/t/airprime-bx310x-http-web-server/21767/5 "2021-12-21T06:39:19Z")

</div>

did u find the solution