# After forgetting, Iphone fails to connect to BC127

**URL:** <https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063>\
**Category:** WiFi and Bluetooth Modules\
**Created:** [October 5, 2018, 9:32pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063 "2018-10-05T21:32:01Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![tgalante](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@tgalante](https://forum.sierrawireless.com/u/tgalante)\
**Post date:** [October 5, 2018, 9:32pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/1 "2018-10-05T21:32:01Z")

</div>

Hello,  
I have a problem in BC127 with Firmware 6.1.5. This did not occur in Firmware 5.11  
I would like to report a Bug in Firmware version 6.1.5  
Is there a newer firmware version?

problem:  
When I pair and connect to a BC127 with my iphone (7 plus, or X) I cannot re-connect after the I “forget” the BC127 from the iphone.

Process  
BC127 list is empty  
iphone sees BC127 in pairing list  
iphone connects to BC127 — success  
iphone- I disconnect from BC127 —success  
iphone - I connect to BC127 —success  
iphone - I forget BC127 —success  
iphone - I connect to BC127 —FAIL  
BC127 list contains the iphone mac address

I have to issue an “unpair” command to the BC127 to clear the list or an “unpair mac address” for the iphone to successfully connect to the BC127 again after I forget the BC127.

This does not happen with Android phones.

How to I report this as a bug?

logs :  
Android:  
BlueCreation Copyright 2017  
Melody Audio V6.1.5  
Build: 1496939390  
Ready  
PAIR\_PENDING  
PAIR\_OK AC3743xxxxx  
OPEN\_OK 10 A2DP AC3743xxxxx  
ROLE\_OK AC3743F676A4 S  
OPEN\_OK 11 AVRCP AC3743xxxxx  
ABS\_VOL 11 127  
//disconnect  
AVRCP\_PAUSE 11  
CLOSE\_OK 10 A2DP AC3743xxxxx  
CLOSE\_OK 11 AVRCP AC3743xxxxx

//reconnect  
OPEN\_OK 10 A2DP AC3743xxxxx  
ROLE\_OK AC3743F676A4 S  
OPEN\_OK 11 AVRCP AC3743xxxxx  
ABS\_VOL 11 127

//forget device  
CLOSE\_OK 11 AVRCP AC3743xxxxx  
CLOSE\_OK 10 A2DP AC3743xxxxx

//reconnects  
OPEN\_OK 10 A2DP AC3743xxxxx  
ROLE\_OK AC3743F676A4 S  
OPEN\_OK 11 AVRCP AC3743xxxxx  
ABS\_VOL 11 127

IPHONE:  
ACTS SAME AS MINE  
BlueCreation Copyright 2017  
Melody Audio V6.1.5  
Build: 1496939390  
Ready

PAIR\_PENDING  
PAIR\_OK xC2A9xxxxxxx  
OPEN\_OK 11 AVRCP xC2A9xxxxxxx  
OPEN\_OK 10 A2DP xC2A9xxxxxxx  
ROLE\_OK xC2A9xxxxxxx S  
ABS\_VOL 11 38  
//disconnect  
CLOSE\_OK 11 AVRCP xC2A9xxxxxxx  
CLOSE\_OK 10 A2DP xC2A9xxxxxxx  
//connect  
OPEN\_OK 11 AVRCP xC2A9xxxxxxx  
OPEN\_OK 10 A2DP xC2A9xxxxxxx  
ROLE\_OK xC2A9xxxxxxx  
ABS\_VOL 11 38  
//forget  
CLOSE\_OK 11 AVRCP xC2A9xxxxxxx  
CLOSE\_OK 10 A2DP xC2A9xxxxxxx

list //from hurcules  
LIST xC2A9xxxxxxx A2DP AVRCP  
OK

unpair //from hurcules  
OK

list //from hurcules  
OK

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [October 9, 2018, 10:03am UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/2 "2018-10-09T10:03:44Z")

</div>

@tgalante,

This isn’t a bug in the unit, if you `Forget device` on the iPhone you will need to `unpair` it from the BC127 since the stored/exchanged keys will be different i.e. the iPhone will want to generate a new one where the BC127 will want to use the existing one, the difference will be interpreted as an attack/mis authentication. The same will happen to an Android device if you go into the BT menu and unpair it from there.

All of the firmware is located at the below link.

[https://source.sierrawireless.com/resources/airprime/software/bc127-firmware/](https://source.sierrawireless.com/resources/airprime/software/bc127-firmware/)

Regards

Matt

---

<div class="post-metadata">

**Author:** ![tgalante](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@tgalante](https://forum.sierrawireless.com/u/tgalante)\
**Post date:** [October 9, 2018, 1:39pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/3 "2018-10-09T13:39:40Z")

</div>

Is this new in Melody 6?  
I just tested this same sequence on a BC127 with version “Melody Audio V5.7 RC8 MFI” and the iphone was able to reconnect.to a forgotten device. I did not have to send an unpair command. I did have to power cycle the BC127 (off then on) and cycle the Bluetooth on the iphone (off then on).

Could it be that the version 5 module I have is MFI and the version 6 is not MFI?  
Maybe the MFI feature is helping the iphone feel more comfortable remembering a device it forgot.

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [October 9, 2018, 2:58pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/4 "2018-10-09T14:58:20Z")

</div>

@tgalante,

No the MFi portion of this will not have an impact on this, the 5.x to 6.x possibly will, it was a big (ish) jump in functionality.

Regards

Matt

---

<div class="post-metadata">

**Author:** ![tgalante](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@tgalante](https://forum.sierrawireless.com/u/tgalante)\
**Post date:** [October 9, 2018, 3:10pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/5 "2018-10-09T15:10:39Z")

</div>

Can I downgrade from 6 to 5? in the past I’ve asked this to Blue Creations and they said no, but maybe.

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [October 9, 2018, 4:06pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/6 "2018-10-09T16:06:45Z")

</div>

@tgalante,

Answer remains the same, does not change just because the company name did :-).

I just tested with a 7.2 release against android and it failed to connect.

Sierra Wireless Copyright 2018  
Melody Audio V7.2 RC2 BA  
Build: 1533230344  
Ready  
unpair  
OK  
PAIR\_PENDING  
PAIR\_OK 04C23E048A70  
OPEN\_OK 13 HFP 04C23E048A70  
OPEN\_OK 10 A2DP 04C23E048A70  
ROLE\_OK 04C23E048A70 S  
ROLE\_OK 04C23E048A70 S  
ROLE\_OK 04C23E048A70 S  
OPEN\_OK 11 AVRCP 04C23E048A70  
AVRCP\_PAUSE 11  
AVRCP\_STOP 11  
CLOSE\_OK 11 AVRCP 04C23E048A70 //Here I unpaired the device at the phone end  
CLOSE\_OK 10 A2DP 04C23E048A70  
CLOSE\_OK 13 HFP 04C23E048A70  
list  
LIST 04C23E048A70 A2DP AVRCP HFP //Phone is in the list of pair devices  
OK  
open 04C23E048A70 A2DP //Try to open the A2DP connection with authentication failing  
PENDING  
OPEN\_ERROR A2DP

Regards

Matt

---

<div class="post-metadata">

**Author:** ![tgalante](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@tgalante](https://forum.sierrawireless.com/u/tgalante)\
**Post date:** [October 9, 2018, 4:20pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/7 "2018-10-09T16:20:01Z")

</div>

ok thanks for the help.

---

<div class="post-metadata">

**Author:** ![SW-Ad](https://avatars.discourse-cdn.com/v4/letter/s/e495f1/32.png) [@SW-Ad](https://forum.sierrawireless.com/u/SW-Ad)\
**Post date:** [October 12, 2018, 4:19pm UTC](https://forum.sierrawireless.com/t/after-forgetting-iphone-fails-to-connect-to-bc127/14063/8 "2018-10-12T16:19:34Z")

</div>

I remember a similar issue on Melody 6 when HFP profile was disabled. It has been fixed now, you should try Melody 7.
