# Adl\_fcm\_event\_mem\_release

**URL:** <https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961>\
**Category:** Open AT\
**Created:** [March 3, 2008, 2:09pm UTC](https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961 "2008-03-03T14:09:45Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sladjan](https://avatars.discourse-cdn.com/v4/letter/s/e56c9b/32.png) [@sladjan](https://forum.sierrawireless.com/u/sladjan)\
**Post date:** [March 3, 2008, 2:09pm UTC](https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961/1 "2008-03-03T14:09:45Z")

</div>

Hi,

I have a Gprs/FCM application runing on Q24Pl and i works very well.  
I compiled the same application on Q2687/V663 and it works ok except that  
on every adl\_fcmSendData( form 10 to 200 bytes) it takes more than 3 to 5s in order to receive ADL\_FCM\_EVENT\_MEM\_RELEASE.  
I am with no Flow/Control.

Any idea on this problem…

Thanks.  
Sladj.

---

<div class="post-metadata">

**Author:** ![sladjan](https://avatars.discourse-cdn.com/v4/letter/s/e56c9b/32.png) [@sladjan](https://forum.sierrawireless.com/u/sladjan)\
**Post date:** [March 3, 2008, 6:02pm UTC](https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961/2 "2008-03-03T18:02:14Z")

</div>

Hi,

More info, it hapens only while I am receiving data from GPRS Socket, when the socket is closed the  
ADL\_FCM\_EVENT\_MEM\_RELEASE comes in 1 to 5 ms which is ok but not in 4 to 5seconds.

It looks like logical bug but it is not…  
Thanks,  
sladj.

---

<div class="post-metadata">

**Author:** ![paruthiv](https://avatars.discourse-cdn.com/v4/letter/p/eb8c5e/32.png) [@paruthiv](https://forum.sierrawireless.com/u/paruthiv)\
**Post date:** [March 5, 2008, 6:47am UTC](https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961/3 "2008-03-05T06:47:39Z")

</div>

This could be probably because of the three way handshake implemented in GPRS. After sending data, an acknowledgment is expected for the data block sent. So the Open AT would probably be sending the event only after the handshake for a particular data block is over.

---

<div class="post-metadata">

**Author:** ![sladjan](https://avatars.discourse-cdn.com/v4/letter/s/e56c9b/32.png) [@sladjan](https://forum.sierrawireless.com/u/sladjan)\
**Post date:** [March 5, 2008, 11:24am UTC](https://forum.sierrawireless.com/t/adl-fcm-event-mem-release/1961/4 "2008-03-05T11:24:25Z")

</div>

Hi,  
Well, this is a probelm with the serial Port, sending data to the serial port and receiving back the ADL\_FCM\_EVENT\_MEM\_RELEASE.

It is true that I receive ADL\_FCM\_EVENT\_MEM\_RELEASE in 2ms when the socket is not opened but more then 4s  
when the socket is opened. OpenAt should not wait for Tcp/Ip acknowledgment in order to Ack the adl\_fcmSendData(…)  
I am with +IFC=0,0

I tryed sending data over Gprs with timers, in order to slow down things, but the result is the same with Q2687.  
It is very bizarre…

Thanks,  
Sladj.
