# Open AT

**URL:** https://forum.sierrawireless.com/c/legacy/open-at/61.md?page=5

[Latest](https://forum.sierrawireless.com/latest.md) · [Categories](https://forum.sierrawireless.com/categories.md) · [Tags](https://forum.sierrawireless.com/tags.md)

**Page:** 6

---

## [HTTP PUT Not Working](https://forum.sierrawireless.com/t/http-put-not-working/7995)

<div class="topic-metadata">

**Author:** [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Replies:** 7\
**Last updated:** [July 13, 2015, 11:00am UTC](https://forum.sierrawireless.com/t/http-put-not-working/7995 "2015-07-13T11:00:56Z")

</div>

On my AirPi (SL8082T) I took the standard http\_get sample: /\* HTTP GET command \*/ http\_ClientTestCtx.DataChannel = wip\_getFileOpts ( http\_ClientTestCtx.CnxChannel, /\* session channel \*/ (ascii \*) HTTP\_STR\_URL, …

---

## [I2C works! (Devkit)](https://forum.sierrawireless.com/t/i2c-works-devkit/8036)

<div class="topic-metadata">

**Author:** [@floydqueen](https://forum.sierrawireless.com/u/floydqueen)\
**Replies:** 4\
**Last updated:** [July 8, 2015, 3:24pm UTC](https://forum.sierrawireless.com/t/i2c-works-devkit/8036 "2015-07-08T15:24:38Z")

</div>

I am now using SL808XT to send I2C signal to keypad IC. I’m testing on the development Kit. Now I got the I2C working! I shift 1 bit right of the slave address. It works!

---

## [Burning MC7354 to different Carrier](https://forum.sierrawireless.com/t/burning-mc7354-to-different-carrier/8032)

<div class="topic-metadata">

**Author:** [@bluerains](https://forum.sierrawireless.com/u/bluerains)\
**Replies:** 3\
**Last updated:** [July 8, 2015, 11:38am UTC](https://forum.sierrawireless.com/t/burning-mc7354-to-different-carrier/8032 "2015-07-08T11:38:10Z")

</div>

Sorry if post to the wrong place. But I am new to 3G/4G router and we bought some SIERRA MC7354 module which currently is for AT&T. So now we need it for Verizon. We download the file Build4285-Approved-7354-EXE which…

---

## [Failure to configure I2C subscription](https://forum.sierrawireless.com/t/failure-to-configure-i2c-subscription/8027)

<div class="topic-metadata">

**Author:** [@mattmc318](https://forum.sierrawireless.com/u/mattmc318)\
**Replies:** 4\
**Last updated:** [July 8, 2015, 10:23am UTC](https://forum.sierrawireless.com/t/failure-to-configure-i2c-subscription/8027 "2015-07-08T10:23:06Z")

</div>

Hello, I’m trying to set up I2C on my device (SL8080T), but I’m having issues. I’ve followed the sample code in the ADL user guide (§3.13.18), and came up with the following test program, intended to subscribe to the I2…

---

## [How to configure a FXT009 to establish a GPRS connection](https://forum.sierrawireless.com/t/how-to-configure-a-fxt009-to-establish-a-gprs-connection/7843)

<div class="topic-metadata">

**Author:** [@Dhruv](https://forum.sierrawireless.com/u/Dhruv)\
**Replies:** 4\
**Last updated:** [July 7, 2015, 10:11pm UTC](https://forum.sierrawireless.com/t/how-to-configure-a-fxt009-to-establish-a-gprs-connection/7843 "2015-07-07T22:11:13Z")

</div>

Hi I am using a FXT009 Sierra Wireless Modem to control a Load Break Switch. I want to know which AT commands i can used to establish a GPRS connection. I also wish to how i can configure to connect to a private APN? …

---

## [Replacing Old TANGO 864-2 Modem with Airlink FX100 modem](https://forum.sierrawireless.com/t/replacing-old-tango-864-2-modem-with-airlink-fx100-modem/8009)

<div class="topic-metadata">

**Author:** [@nrgs](https://forum.sierrawireless.com/u/nrgs)\
**Replies:** 1\
**Last updated:** [June 19, 2015, 2:49pm UTC](https://forum.sierrawireless.com/t/replacing-old-tango-864-2-modem-with-airlink-fx100-modem/8009 "2015-06-19T14:49:13Z")

</div>

Hi all, I hope this is the right place to ask the question . I have TANGO 864-2 modem that was connected to a HMI software thorugh RS232 and sent SMS , from what i know it uses AT commands to communicate with the mod…

---

## [How to enable the real time enhancement?](https://forum.sierrawireless.com/t/how-to-enable-the-real-time-enhancement/7994)

<div class="topic-metadata">

**Author:** [@wgd0909](https://forum.sierrawireless.com/u/wgd0909)\
**Replies:** 1\
**Last updated:** [June 13, 2015, 10:15am UTC](https://forum.sierrawireless.com/t/how-to-enable-the-real-time-enhancement/7994 "2015-06-13T10:15:44Z")

</div>

The Real Time enhancement feature The Real Time Enhancement feature state can be read thanks to the AT+WCFM=5 command response value: This feature state is represented by the bit 4 (00000010 in hexadecimal format). Q…

---

## [340U packet flow at linux](https://forum.sierrawireless.com/t/340u-packet-flow-at-linux/7962)

<div class="topic-metadata">

**Author:** [@hagay](https://forum.sierrawireless.com/u/hagay)\
**Replies:** 1\
**Last updated:** [June 9, 2015, 6:19am UTC](https://forum.sierrawireless.com/t/340u-packet-flow-at-linux/7962 "2015-06-09T06:19:55Z")

</div>

Hello experts, I try to work with AirCard 340U cellular modem over Linux. I take the NetGear doc that describe how to work with Linux (at Linux-Support-S2.13N2.25.zip) I install the following drivers: GobiUSBNet qcs…

---

## [Issues Subscribing to SPI Bus with GPIO as Chip Select](https://forum.sierrawireless.com/t/issues-subscribing-to-spi-bus-with-gpio-as-chip-select/7975)

<div class="topic-metadata">

**Author:** [@mattmc318](https://forum.sierrawireless.com/u/mattmc318)\
**Replies:** 2\
**Last updated:** [May 29, 2015, 11:26pm UTC](https://forum.sierrawireless.com/t/issues-subscribing-to-spi-bus-with-gpio-as-chip-select/7975 "2015-05-29T23:26:52Z")

</div>

Hello, I’m having issues trying to subscribe to an SPI bus in Open AT. However, I followed the ADL documentation very closely and am still having trouble. \[code\]#include “adl\_global.h” #include “adl\_gpio.h” #include …

---

## [GPIO platform configuration module](https://forum.sierrawireless.com/t/gpio-platform-configuration-module/7961)

<div class="topic-metadata">

**Author:** [@shruthipawar](https://forum.sierrawireless.com/u/shruthipawar)\
**Replies:** 3\
**Last updated:** [May 25, 2015, 9:40pm UTC](https://forum.sierrawireless.com/t/gpio-platform-configuration-module/7961 "2015-05-25T21:40:03Z")

</div>

Hello All,. I am trying to connect an LED to the GPIO pins for a simple blinking operation . . I went through the code for the GPIO configuration . I wanted to know as what all the changes has to be done in platform s…

---

## [Any way to use I2C on SL808x?](https://forum.sierrawireless.com/t/any-way-to-use-i2c-on-sl808x/7937)

<div class="topic-metadata">

**Author:** [@mattmc318](https://forum.sierrawireless.com/u/mattmc318)\
**Replies:** 1\
**Last updated:** [May 11, 2015, 9:52am UTC](https://forum.sierrawireless.com/t/any-way-to-use-i2c-on-sl808x/7937 "2015-05-11T09:52:41Z")

</div>

Hi all, Our team is developing on the SL8080BT, but it appears that the latest firmware package for this module (7.52.2.A5.201411281219) doesn’t support I2C. Firmware package 7.53.0.A3.201501301110 appears to include I2…

---

## [0xFF's overwriting files, using adl\_fs...() commands](https://forum.sierrawireless.com/t/0xffs-overwriting-files-using-adl-fs-commands/7933)

<div class="topic-metadata">

**Author:** [@DavidWC](https://forum.sierrawireless.com/u/DavidWC)\
**Replies:** 1\
**Last updated:** [May 8, 2015, 11:08am UTC](https://forum.sierrawireless.com/t/0xffs-overwriting-files-using-adl-fs-commands/7933 "2015-05-08T11:08:12Z")

</div>

Data Logger: Wakes up Read burst of data UART ASYNC Writes to new file, file system Sends over GPRS Sleep Issue: ~30KB Files are sometimes entirely overwritten in the file system, with 0xFF’s Un-corrupt files are be…

---

## [SL8082T - SPI latency](https://forum.sierrawireless.com/t/sl8082t-spi-latency/7924)

<div class="topic-metadata">

**Author:** [@johnofleek](https://forum.sierrawireless.com/u/johnofleek)\
**Replies:** 3\
**Last updated:** [May 5, 2015, 9:06am UTC](https://forum.sierrawireless.com/t/sl8082t-spi-latency/7924 "2015-05-05T09:06:42Z")

</div>

Hi There seems to be a latency issue with the SL8082T SPI bus service OAT library The attached file is an example I captured on the SL8 SPI port - using the SPI sample (either sync or async methods have same issue). w…

---

## [Access to FTP server via Q2698 module](https://forum.sierrawireless.com/t/access-to-ftp-server-via-q2698-module/7903)

<div class="topic-metadata">

**Author:** [@SL8082](https://forum.sierrawireless.com/u/SL8082)\
**Replies:** 2\
**Last updated:** [May 4, 2015, 12:27pm UTC](https://forum.sierrawireless.com/t/access-to-ftp-server-via-q2698-module/7903 "2015-05-04T12:27:16Z")

</div>

Hello every one, I would like to access to my FTP server installed on my PC via the Q2698 module. But I don’t know how to do this. First, I have to have an internet connection on my PC via the module. So, i tried with …

---

## [SL8082T - SPI CLOCK speed setting 4 looks broken](https://forum.sierrawireless.com/t/sl8082t-spi-clock-speed-setting-4-looks-broken/7919)

<div class="topic-metadata">

**Author:** [@johnofleek](https://forum.sierrawireless.com/u/johnofleek)\
**Replies:** 4\
**Last updated:** [May 4, 2015, 8:19am UTC](https://forum.sierrawireless.com/t/sl8082t-spi-clock-speed-setting-4-looks-broken/7919 "2015-05-04T08:19:13Z")

</div>

R7.52.2.A5.201411281219 S4\_1\_0\_21AP R2371 CNSHZ-ED-XP0031 2014/11/27 The clock speed (Clock\_Speed in example struct below) - works differently from the manual. Measured: 0 = 1MHz 1 = 5MHz 2 =10MHz 3 = 15.34MHz 4 …

---

## [Send mms via AT Commands on AirPrime SL6087](https://forum.sierrawireless.com/t/send-mms-via-at-commands-on-airprime-sl6087/7885)

<div class="topic-metadata">

**Author:** [@alexradu\_rsd](https://forum.sierrawireless.com/u/alexradu_rsd)\
**Replies:** 2\
**Last updated:** [April 22, 2015, 6:52am UTC](https://forum.sierrawireless.com/t/send-mms-via-at-commands-on-airprime-sl6087/7885 "2015-04-22T06:52:27Z")

</div>

Hy, I am trying to send a MMS via AT Commands on AirPrime SL6087, I have an issue with the sending. I get error 891 - message format corrupt. I attached the commands below. Any help will be greatly appreciated. at OK …

---

## [WLOC description](https://forum.sierrawireless.com/t/wloc-description/7859)

<div class="topic-metadata">

**Author:** [@derryl99](https://forum.sierrawireless.com/u/derryl99)\
**Replies:** 3\
**Last updated:** [April 16, 2015, 9:58am UTC](https://forum.sierrawireless.com/t/wloc-description/7859 "2015-04-16T09:58:34Z")

</div>

Hi Folks, I try to use the WLOC functionality to provide GSM based location services. Unfortunately I could not find any detailed description how the given data could be interpreted. I only found the OpenAT description …

---

## [SD Card Interface Library](https://forum.sierrawireless.com/t/sd-card-interface-library/7824)

<div class="topic-metadata">

**Author:** [@jdmara](https://forum.sierrawireless.com/u/jdmara)\
**Replies:** 3\
**Last updated:** [March 25, 2015, 6:35pm UTC](https://forum.sierrawireless.com/t/sd-card-interface-library/7824 "2015-03-25T18:35:40Z")

</div>

I have been doing some searching, but have not found anything. We are using Open AT with the SL8080BT and was wondering if there are any popular SD card libraries. Has anybody else had any luck?

---

## [Setting time & date to created file in File system](https://forum.sierrawireless.com/t/setting-time-date-to-created-file-in-file-system/7829)

<div class="topic-metadata">

**Author:** [@nagaraju](https://forum.sierrawireless.com/u/nagaraju)\
**Replies:** 3\
**Last updated:** [March 25, 2015, 6:55am UTC](https://forum.sierrawireless.com/t/setting-time-date-to-created-file-in-file-system/7829 "2015-03-25T06:55:31Z")

</div>

hi, iam using q2687rd FW 7.52, i created a new file in write mode and i want to set the time and date to this file using adl\_fsSetTimeDate(); i passed 1st arg as file name and my question is, how can i give the 2nd & 3…

---

## [adl\_atCmdSendExt not firing handler for custom command](https://forum.sierrawireless.com/t/adl-atcmdsendext-not-firing-handler-for-custom-command/7337)

<div class="topic-metadata">

**Author:** [@karlkuhn](https://forum.sierrawireless.com/u/karlkuhn)\
**Replies:** 6\
**Last updated:** [March 5, 2015, 11:29am UTC](https://forum.sierrawireless.com/t/adl-atcmdsendext-not-firing-handler-for-custom-command/7337 "2015-03-05T11:29:32Z")

</div>

Hi, I am trying to call a custom command using adl\_atCmdSendExt. My function below is generic and normally works when it is a non custom command such as AT+CSQ, but it does not return when I try and call a custom command…

---

## [Reasons for TCP client connection Error while opening a sock](https://forum.sierrawireless.com/t/reasons-for-tcp-client-connection-error-while-opening-a-sock/7786)

<div class="topic-metadata">

**Author:** [@nagaraju](https://forum.sierrawireless.com/u/nagaraju)\
**Replies:** 1\
**Last updated:** [March 4, 2015, 6:59am UTC](https://forum.sierrawireless.com/t/reasons-for-tcp-client-connection-error-while-opening-a-sock/7786 "2015-03-04T06:59:03Z")

</div>

hi, first time i got ip from wip\_bearer and tryed to open TCP client socket when server port listen mode it successfully opened socket. but next i disconnect the server port and again try reconnect the server port in l…

---

## [Returned value from adl\_fsInstall?](https://forum.sierrawireless.com/t/returned-value-from-adl-fsinstall/6356)

<div class="topic-metadata">

**Author:** [@MichaG](https://forum.sierrawireless.com/u/MichaG)\
**Replies:** 12\
**Last updated:** [March 2, 2015, 6:56pm UTC](https://forum.sierrawireless.com/t/returned-value-from-adl-fsinstall/6356 "2015-03-02T18:56:06Z")

</div>

Hello, In the ADL User Guide for Open AT Framework OS 6.50.A2 for AirPrime SL808xT and Q2698, here is what is written for adl\_fsInstall function: But there is no documentation about the int returned value. Can Sierra…

---

## [Problem in creating a TCP server?](https://forum.sierrawireless.com/t/problem-in-creating-a-tcp-server/7122)

<div class="topic-metadata">

**Author:** [@nagaraju](https://forum.sierrawireless.com/u/nagaraju)\
**Replies:** 8\
**Last updated:** [February 27, 2015, 8:48am UTC](https://forum.sierrawireless.com/t/problem-in-creating-a-tcp-server/7122 "2015-02-27T08:48:03Z")

</div>

Dear sir, Iam using Q2687rd GSM module v7.44. iam unable to creat a TCP server in my application wip\_TCPServerCreateOpts( uPortNo,(wip\_eventHandler\_f) evHandler, NULL, WIP\_COPT\_KEEPALIVE, (u32) 20, WIP\_COPT\_SND\_BUFSI…

---

## [Error in arm-none-eabi-g++.exe: error:, during linking](https://forum.sierrawireless.com/t/error-in-arm-none-eabi-g-exe-error-during-linking/7770)

<div class="topic-metadata">

**Author:** [@sruchanreddy](https://forum.sierrawireless.com/u/sruchanreddy)\
**Replies:** 2\
**Last updated:** [February 23, 2015, 9:28am UTC](https://forum.sierrawireless.com/t/error-in-arm-none-eabi-g-exe-error-during-linking/7770 "2015-02-23T09:28:31Z")

</div>

Am trying to build my project with the make builder. Am successful in compiling the project, But am facing the error saying arm-none-eabi-g++.exe: error:, during linking the libararies such as ECALL MODEM, SECURITY.LOCA…

---

## [GSM Registration Status Issue](https://forum.sierrawireless.com/t/gsm-registration-status-issue/7686)

<div class="topic-metadata">

**Author:** [@JSurf](https://forum.sierrawireless.com/u/JSurf)\
**Replies:** 9\
**Last updated:** [February 17, 2015, 2:00pm UTC](https://forum.sierrawireless.com/t/gsm-registration-status-issue/7686 "2015-02-17T14:00:12Z")

</div>

Good day, I’m having a very similar issue as these 2 posts \[url\]https://forum.sierrawireless.com/t/gsm-network-problem/4906/6\] \[url\]https://forum.sierrawireless.com/t/can-not-catch-gsm-disconnection/5225/3\] I’ve noti…

---

## [CA Certificate for wip\_SSLInitOpts()](https://forum.sierrawireless.com/t/ca-certificate-for-wip-sslinitopts/7696)

<div class="topic-metadata">

**Author:** [@TEKNB](https://forum.sierrawireless.com/u/TEKNB)\
**Replies:** 2\
**Last updated:** [February 17, 2015, 6:39am UTC](https://forum.sierrawireless.com/t/ca-certificate-for-wip-sslinitopts/7696 "2015-02-17T06:39:16Z")

</div>

According to the example (SSL\_UGD.pdf) there is to use a valid root certificate for wip\_SSLInitOpts(), parameter WIP\_COPT\_CERT\_AUTHORITY. How do we determine whether our certificate is of root type or not? Also the valid…

---

## [Help tracing "data abort"](https://forum.sierrawireless.com/t/help-tracing-data-abort/7741)

<div class="topic-metadata">

**Author:** [@oscar\_mezyk](https://forum.sierrawireless.com/u/oscar_mezyk)\
**Replies:** 2\
**Last updated:** [February 13, 2015, 9:17am UTC](https://forum.sierrawireless.com/t/help-tracing-data-abort/7741 "2015-02-13T09:17:02Z")

</div>

Dear All, I am trying to find issue with my app. Have two tasks: main (16k stack) and i2c (4k stack). The second one crashes randomly and throws exception (no “Except RTK …” debug). Backtraces (always the same): I am…

---

## [General guidelines for optimizing W32K mode](https://forum.sierrawireless.com/t/general-guidelines-for-optimizing-w32k-mode/7740)

<div class="topic-metadata">

**Author:** [@mikejamesleslie](https://forum.sierrawireless.com/u/mikejamesleslie)\
**Replies:** 1\
**Last updated:** [February 12, 2015, 10:22am UTC](https://forum.sierrawireless.com/t/general-guidelines-for-optimizing-w32k-mode/7740 "2015-02-12T10:22:56Z")

</div>

I’ve spent the last couple of weeks working on the W32K sleep mode for the SL808x. I encountered a number of hurdles preventing the device from properly going to sleep. None of these items listed below were given any ref…

---

## [Message filter visibility / tasks "borders" - linker error](https://forum.sierrawireless.com/t/message-filter-visibility-tasks-borders-linker-error/7598)

<div class="topic-metadata">

**Author:** [@oscar\_mezyk](https://forum.sierrawireless.com/u/oscar_mezyk)\
**Replies:** 1\
**Last updated:** [February 5, 2015, 11:59am UTC](https://forum.sierrawireless.com/t/message-filter-visibility-tasks-borders-linker-error/7598 "2015-02-05T11:59:54Z")

</div>

The OpenAT docs are specifing, that: If I have two tasks and have two different message filters, how/where to put message filters definition to make it work correctly? Do they have to be defined as globals or local st…

---

## [UART1 buffer preventing W32K mode](https://forum.sierrawireless.com/t/uart1-buffer-preventing-w32k-mode/7707)

<div class="topic-metadata">

**Author:** [@mikejamesleslie](https://forum.sierrawireless.com/u/mikejamesleslie)\
**Replies:** 4\
**Last updated:** [February 4, 2015, 7:28pm UTC](https://forum.sierrawireless.com/t/uart1-buffer-preventing-w32k-mode/7707 "2015-02-04T19:28:51Z")

</div>

Hello, I’m working on the SL8080 FW 2.52.2.A5 I’m encountering problems entering W32K sleep mode and I’m 90% confident it has to do with data accumulating in the UART1 buffer. The data is a combination of unsolicited FW…

[Previous page](https://forum.sierrawireless.com/c/legacy/open-at/61.md?page=4)

[Next page](https://forum.sierrawireless.com/c/legacy/open-at/61.md?page=6)
