Knowledge base


[Hilo] How to optimize the electrical consumption of Hilo? [HL Series FAQ] (1)
[Hilo] How many GPIOs are available on my Hilov1 module? [HL Series FAQ] (1)
[Hilo] Can I use two SIM cards with a HiLo? [HL Series FAQ] (1)
[Hilo] Why no response for any AT command after new upgrade? [HL Series FAQ] (1)
[Hilo] Why does Hilo not response to any AT command? [HL Series FAQ] (1)
[Hilo] Do I have to use a full UART or only RX/TX? [HL Series FAQ] (1)
[Hilo] When POK_IN should always connect to GND? [HL Series FAQ] (1)
[Hilo] single ended microphone Vs. differential ended microp [HL Series FAQ] (1)
[Hilo] Why would I need to keep RTC? [HL Series FAQ] (1)
[Hilo] HILO RESET [HL Series FAQ] (1)
[Hilo] How to do a correct RF layout? [HL Series FAQ] (1)
[Hilo] How do I certify my product? [HL Series FAQ] (1)
[Hilo] measurement of the current consumption [HL Series FAQ] (1)
[Hilo] What’s the meaning for <tim1> and<tim2> in KCNXTIMER? [HL Series FAQ] (1)
[Hilo] How to abort AT+KTCPCNX=1? [HL Series FAQ] (1)
[Hilo] How to know the call is MO or MT call? [HL Series FAQ] (1)
[Hilo] How to use AT+KATH? [HL Series FAQ] (1)
[Hilo] How to use command of <AT+CVHU>? [HL Series FAQ] (1)
[Hilo] What is the different between ATH[type] and AT+CHUP? [HL Series FAQ] (1)
[Hilo] What’s the main difference of Hilo3G and Hilo3GPS? [HL Series FAQ] (1)
[Hilo] How to get SIM phone number with AT command? [HL Series FAQ] (1)
Hilo] Pre-certification for US N/W Operators [HL Series FAQ] (1)
[Hilo] How to disable the URC of CALL? [HL Series FAQ] (1)
[Hilo] maximum current consumption for Hilo3G USB [HL Series FAQ] (1)
[Hilo] How many MUX channels can be used in Hilo? [HL Series FAQ] (1)
[Hilo] how to use AT+KSYNC to indicate the network status? [HL Series FAQ] (1)
[Hilo] Why connection is always terminated abruptly? [HL Series FAQ] (1)
[Hilo] Why I fail to send big data to FTP server? [HL Series FAQ] (1)
[Hilo] How to set AT+CCFC? Could you give me an example? [HL Series FAQ] (1)
[Hilo] How long pulse of POK_IN needed to start up? [HL Series FAQ] (1)