Knowledge base   HL Series FAQ


Topic Replies Created
[Hilo] Why <AT+KTCPSTART=1 failed with a new SIM card? 1 July 23, 2013
[Hilo] <--EOF--Pattern--> fail to exit data mode 1 July 23, 2013
[Hilo] Why no URC when a SMS received even in command mode? 1 July 23, 2013
[Hilo] +KTCP_DATA not displayed 1 July 23, 2013
[Hilo] How to know the Tx level during a call? 1 July 23, 2013
[Hilo] About AT+CSQ and AT+KCELL> 1 July 23, 2013
[Hilo] Why BER information of <AT+CSQ> not be detected? 1 July 23, 2013
[Hilo] network register issue 1 July 23, 2013
[Hilo] maximum speed of UART for Hilo3G 1 July 23, 2013
[Hilo] For 3G module, how to know it’s 3G or 2G network? 1 July 23, 2013
[Hilo]How to use +KSMPTSND to send special character? 1 July 23, 2013
[Hilo] What will happen if I toggle RTS signal? 1 July 23, 2013
[Hilo] How host be signaled when Hilo3G wake up from sleeep? 1 July 23, 2013
[Hilo] How to tune the voice volume we hear? 1 July 23, 2013
[Hilo] How to get network time automatically with <AT+CTZU>? 1 July 23, 2013
[Hilo] USB flow control for Hilo3G 1 July 23, 2013
[Hilo] What’s the meaning of “URC”? 1 July 23, 2013
[Hilo] Why we fail to use FTP/TCP when setting 7 bit UART? 1 July 23, 2013
[Hilo] How to deactivate PCS 1900MHz band on HiloV2? 1 July 23, 2013
[Hilo] Hilo3G USB driver for Android 2.3 or 4.0? 1 July 23, 2013
[Hilo] Is it possible to send email with Gmail SMTP? 1 July 23, 2013
[Hilo] What’s the difference between ISO 16750 and AECQ 100? 1 July 23, 2013
[Hilo] Why TCP session information disappears automatically? 1 July 23, 2013
[Hilo] Can we stop the AT+KSMTPUL and try again immediately? 1 July 23, 2013
[Hilo] a voice call during GPRS data transmission 1 July 23, 2013
[Hilo] AT+CLVL=x only take effective during a voice call? 1 July 23, 2013
[Hilo] GPRS is not really attached for a new SIM card 1 July 23, 2013
[Hilo] What’s the difference of NMO1 and NMO2? 1 July 23, 2013
[Hilo] baud rate from the µC to the module? 1 July 23, 2013
[Hilo]max re-transmission time to send a packet data 1 July 23, 2013