# General wireless topics FAQ

**URL:** https://forum.sierrawireless.com/c/knowledge-base/general-wireless-topics-faq/56.md

[Latest](https://forum.sierrawireless.com/latest.md) · [Categories](https://forum.sierrawireless.com/categories.md) · [Tags](https://forum.sierrawireless.com/tags.md)

---

## [About the General wireless topics FAQ category](https://forum.sierrawireless.com/t/about-the-general-wireless-topics-faq-category/62)

<div class="topic-metadata">

**Author:** [@system](https://forum.sierrawireless.com/u/system)\
**Replies:** 0\
**Last updated:** [October 26, 2012, 12:59pm UTC](https://forum.sierrawireless.com/t/about-the-general-wireless-topics-faq-category/62 "2012-10-26T12:59:38Z")

</div>

Network-related topics, SIM card issues, power supply, antenna design, 3GPP standards, certification and regulatory approvals, …

---

## [SMS is not sent immediately](https://forum.sierrawireless.com/t/sms-is-not-sent-immediately/6143)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 1\
**Last updated:** [July 19, 2017, 11:37am UTC](https://forum.sierrawireless.com/t/sms-is-not-sent-immediately/6143 "2017-07-19T11:37:26Z")

</div>

Background Minicards and SL80xx modems are customized to attempt to send SMS multiple times. In case when SMS is not sent immediately, modem will attempt to send SMS again after predefined wait interval has elapsed. AT!…

---

## [Error while using pppd with linux using chatscripts.](https://forum.sierrawireless.com/t/error-while-using-pppd-with-linux-using-chatscripts/6429)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [July 9, 2013, 11:41am UTC](https://forum.sierrawireless.com/t/error-while-using-pppd-with-linux-using-chatscripts/6429 "2013-07-09T11:41:22Z")

</div>

When using pppd with Linux using chatscripts there is an error with AT commands in establishing the connection because of /d/c not included in the CONNECT string of the chatscript file. It is always better to use the sc…

---

## [How to send a special character in SMS??](https://forum.sierrawireless.com/t/how-to-send-a-special-character-in-sms/6241)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [April 3, 2013, 11:22am UTC](https://forum.sierrawireless.com/t/how-to-send-a-special-character-in-sms/6241 "2013-04-03T11:22:41Z")

</div>

How to send a special character in SMS?? In order to send special characters like { \\ \[ \] ^ in SMS , character set needs to be set to “CUSTOM”(User defined character set) AT+CSCS= “CUSTOM” For example : Send the b…

---

## [Unwanted voltage level on Airprime module in OFF state](https://forum.sierrawireless.com/t/unwanted-voltage-level-on-airprime-module-in-off-state/6195)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [March 4, 2013, 10:24am UTC](https://forum.sierrawireless.com/t/unwanted-voltage-level-on-airprime-module-in-off-state/6195 "2013-03-04T10:24:24Z")

</div>

It’s really mandatrory not to have any voltage activities on all the pin out of the AIRPRIME module when the module is in OFF sate. If there’s solme pull up resistor on some pin out, even when the module is off, this ca…

---

## [Is IP address of module still valid after network is lost ?](https://forum.sierrawireless.com/t/is-ip-address-of-module-still-valid-after-network-is-lost/6179)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 26, 2013, 12:23pm UTC](https://forum.sierrawireless.com/t/is-ip-address-of-module-still-valid-after-network-is-lost/6179 "2013-02-26T12:23:21Z")

</div>

Hi, When the network is lost, will the IP address assigned to the module be still valid? In case the network is lost, even though module is not attached to the network, but the existing PDP context will still be acti…

---

## [PLMN selection when module is in manual mode operator select](https://forum.sierrawireless.com/t/plmn-selection-when-module-is-in-manual-mode-operator-select/6178)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 26, 2013, 12:19pm UTC](https://forum.sierrawireless.com/t/plmn-selection-when-module-is-in-manual-mode-operator-select/6178 "2013-02-26T12:19:49Z")

</div>

Hi, When the module is in manual mode for Operator selection, how is the PLMN selected? The network selection is done by an algorithm which is provided in the 3GPP specification (3GPP spec 23.022 4.4.3.1.B ). According…

---

## [PLMN selection order in automatic mode & use of at+cops=0](https://forum.sierrawireless.com/t/plmn-selection-order-in-automatic-mode-use-of-at-cops-0/6177)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 26, 2013, 12:12pm UTC](https://forum.sierrawireless.com/t/plmn-selection-order-in-automatic-mode-use-of-at-cops-0/6177 "2013-02-26T12:12:30Z")

</div>

Hi, According to 3gpp, if the network selection mode is automatic then the order of selection at start /recovery from a lack of coverage is as follows: Last registered PLMN; this is stored in SIM. HPLMN. PLMN from use…

---

## [Remaining SIM PIN unlock attempts](https://forum.sierrawireless.com/t/remaining-sim-pin-unlock-attempts/6145)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 14, 2013, 4:36pm UTC](https://forum.sierrawireless.com/t/remaining-sim-pin-unlock-attempts/6145 "2013-02-14T16:36:41Z")

</div>

This section is applicable to MC87xx, MC77xx, and SL80xx modems. Background Some applications need to check remaining SIM PIN unlock attempts and provide notifications to the user. Recently, a custom AT command (AT+CP…

---

## [Unable to send SMS during active data connection](https://forum.sierrawireless.com/t/unable-to-send-sms-during-active-data-connection/6142)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 14, 2013, 4:26pm UTC](https://forum.sierrawireless.com/t/unable-to-send-sms-during-active-data-connection/6142 "2013-02-14T16:26:28Z")

</div>

Background There are four types of MO SMS transport services that can be configured on Minicards and SL80xx modems. 0 Packet Domain 1 Circuit switched 2 Packet Domain preferred (use circuit switched if GPRS not av…

---

## [simaltaneous AT commands execution in CMUX mode](https://forum.sierrawireless.com/t/simaltaneous-at-commands-execution-in-cmux-mode/6123)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 6, 2013, 10:13am UTC](https://forum.sierrawireless.com/t/simaltaneous-at-commands-execution-in-cmux-mode/6123 "2013-02-06T10:13:36Z")

</div>

Hi, In CMUX mode, can AT commands be executed simultaneously for a particular software element? If an AT command is in progress on one port, the port is blocked until the response is not received. Same holds true in CM…

---

## [What is the maximum length for AT+CUSD command?](https://forum.sierrawireless.com/t/what-is-the-maximum-length-for-at-cusd-command/6120)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 6, 2013, 9:48am UTC](https://forum.sierrawireless.com/t/what-is-the-maximum-length-for-at-cusd-command/6120 "2013-02-06T09:48:09Z")

</div>

Hi, The maximum string length that is acceptable is 182 characters. CUSD depends on the network implementation as it is a supplementary service. +CUSD: 4 is normally returned by the network which means either the CUSD i…

---

## [Is there any command to delete or create files on SIM?](https://forum.sierrawireless.com/t/is-there-any-command-to-delete-or-create-files-on-sim/6119)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 6, 2013, 9:31am UTC](https://forum.sierrawireless.com/t/is-there-any-command-to-delete-or-create-files-on-sim/6119 "2013-02-06T09:31:31Z")

</div>

Hi, There is no command to eliminate/delete or create files on the SIM .With AT+CSIM command it is only possible to perform certain operations like SELECT, READ/UPDATE BINARY etc. For more information on the supported o…

---

## [Creating a forbidden list of networks in SIM](https://forum.sierrawireless.com/t/creating-a-forbidden-list-of-networks-in-sim/6116)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [February 6, 2013, 8:36am UTC](https://forum.sierrawireless.com/t/creating-a-forbidden-list-of-networks-in-sim/6116 "2013-02-06T08:36:55Z")

</div>

Hi, It is possible to create forbidden PLMN list to avoid WCPU® from registering to a network/networks. Using the AT+CRSM command it is possible to write 4 PLMNs to the FPLMN Elementary file using the UPDATE BINARY comm…

---

## [AirPrime module is resetting in loop](https://forum.sierrawireless.com/t/airprime-module-is-resetting-in-loop/6089)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [January 23, 2013, 9:46am UTC](https://forum.sierrawireless.com/t/airprime-module-is-resetting-in-loop/6089 "2013-01-23T09:46:48Z")

</div>

If the AirPrime module (WMP1XX, Q26XX, SL6087) is resetting in loop, the GPIO which ones are multiplexed with the keypad/COL should not be connected to ground, because the internal COL are pulled up to VCC\_1V8, as the /R…

---

## [Analog MIC issue while connecting PCM interface](https://forum.sierrawireless.com/t/analog-mic-issue-while-connecting-pcm-interface/6088)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [January 23, 2013, 9:40am UTC](https://forum.sierrawireless.com/t/analog-mic-issue-while-connecting-pcm-interface/6088 "2013-01-23T09:40:44Z")

</div>

The PCM\_IN signal should be in HiZ state if the PCM interface is not used, if this signal is tied to ground, the analog microphone won’t work.

---

## [How can I receive a reception acknowledgement of a sent SMS?](https://forum.sierrawireless.com/t/how-can-i-receive-a-reception-acknowledgement-of-a-sent-sms/6082)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [January 21, 2013, 4:27pm UTC](https://forum.sierrawireless.com/t/how-can-i-receive-a-reception-acknowledgement-of-a-sent-sms/6082 "2013-01-21T16:27:34Z")

</div>

To get the delivery report once you have sent a SMS, configure the AT+CSMP and AT+CNMI commands as follows: - parameter of AT+CSMP command: bit 5, SRR, set to 1 (Take care that the parameter must be entered in decima…

---

## [UART FIFO depth and how to change the size](https://forum.sierrawireless.com/t/uart-fifo-depth-and-how-to-change-the-size/6077)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [January 21, 2013, 11:02am UTC](https://forum.sierrawireless.com/t/uart-fifo-depth-and-how-to-change-the-size/6077 "2013-01-21T11:02:18Z")

</div>

\[size=150\]UART FIFO depth\[/size\] UART FIFO depth (FD) represents the amount of bytes that can be received over UART before an interrupt is generated internally to read the received data. If hardware flow control is enab…

---

## [DRX and DTX :how does it work?](https://forum.sierrawireless.com/t/drx-and-dtx-how-does-it-work/5909)

<div class="topic-metadata">

**Author:** [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Replies:** 0\
**Last updated:** [October 26, 2012, 12:59pm UTC](https://forum.sierrawireless.com/t/drx-and-dtx-how-does-it-work/5909 "2012-10-26T12:59:38Z")

</div>

DRX : Discontinuous Reception DRX is a technique that allows the mobile station to power down significant amounts of its internal circuitry for a high percentage of the time when it is in the idle mode. The period of t…
